How To Install New RAM Brake Pads

If you’re looking for a quick and easy way to upgrade your vehicle’s braking system, installing new brake pads is a great place to start. In this article, we’ll show you how to install new RAM brake pads. Don’t worry if you’re not mechanically inclined, we’ll make it easy to understand and maybe even a little funny!

Before You Begin

Before you start the installation process, you need to gather the necessary tools and materials. You will need a jack, jack stands, lug wrench, brake cleaner, a C-clamp, and of course, your new brake pads. Make sure you have all of these items before you begin.

Step 1: Lift the Car

Using the jack and jack stands, lift the car and secure it on the stands. This is a crucial step, so make sure you’re using the right equipment and you’re doing it safely. We don’t want you to get hurt, and we certainly don’t want your car to fall on you!

Step 2: Remove the Wheels

Use the lug wrench to remove the wheels. If you don’t know which way to turn the wrench, remember “lefty loosey, righty tighty.” It’s also important to remember which bolts go where, so you don’t mix them up later. If you’re really forgetful, take a picture of each wheel before you remove it.

Step 3: Remove the Old Brake Pads

Using a C-clamp, compress the brake caliper piston. This will give you enough room to remove the old brake pads. Be careful not to damage the piston or brake lines while doing this. Then, remove the old brake pads from the caliper.

Step 4: Clean the Brake Components

Spray brake cleaner on the rotor, caliper, and surrounding components to remove any dirt and grime. This will ensure proper braking performance and help prevent future brake problems.

Step 5: Install the New Brake Pads

Place the new brake pads into the caliper. Make sure they’re positioned correctly and securely. Some brake pads have indicators on them to show which side faces the rotor, so make sure you pay attention to those.

Step 6: Reinstall the Wheels

Once the new brake pads are installed, you can put the wheels back on. Use the lug wrench to tighten the bolts, but not too tight. You want to be able to remove them easily the next time you need to change your brake pads.

Step 7: Test Your Brakes

After you’ve completed the installation process, it’s important to test your brakes before driving. Pump the brake pedal a few times to make sure the pads are properly seated and to build up brake pressure. Then, take your car for a spin around the block to make sure everything is working as it should be.

Installing new RAM brake pads is a simple process that can be done in just a few hours. With the right tools and a little bit of know-how, you can upgrade your vehicle’s braking system and enjoy better stopping power. And who knows, maybe you’ll even impress your friends with your newfound mechanical skills!