How To Replace Dodge Car Key Battery
Most modern Dodge vehicles use a key fob which is the remote alternative to traditional car keys. It is a miniature part that allows you to lock and unlock the vehicle from a distance, but it comes with a battery that will eventually have to be replaced. Below is a guide for doing it yourself without scheduled servicing.
Step One
Look at the back of your key fob. You should see a lever that you’ll need to slide in order to release its emergency key. Do this now and after removing your emergency key put it aside in a safe spot where you won’t lose it.
Step Two
Find an object which is flat sided. Flathead screwdrivers are highly recommended.
Step Three
Look at the fob’s bottom, and you should see a slot which is blank. This is the location where you must insert the screwdriver so you can gently pry open the 2 halves.
Step Four
Separate the 2 halves to see the battery and internal electronics. Gently apply your screwdriver again to slide its battery from the housing. Make note of how it is positioned so you’ll correctly install the replacement battery. In case you forget, just remember to align the 2 “+” signs.
Step Five
Get a new replacement battery, which should be a model CR2032 that can be purchased in most auto parts stores. Slide it inside the slot where the previous battery was located.
Step Six
Take your key fobs other portion and click the 2 parts back together, and remember to return your emergency key. That’s it!
Frequently Asked Questions
Do I have to reprogram the key fob once the battery has been changed?
No, you shouldn’t have to reprogram a key fob just because you’ve installed a new battery. That being said, those who replace the internal electronics or wiring will have to reprogram it to ensure it is properly paired with the vehicle.
Do I need to hire a technician to replace my key fob battery?
As you can see from the guide above, replacing the key fob’s battery in your Dodge is a straightforward procedure that can be done at home without having to hire anyone. However, those that still find the task too tedious or who do not have the time to be bothered can take their vehicle to a dealer where the technician can quickly change it.
Can I use a CR2025 battery as an alternative to the CR2032?
It depends on the vehicle, and it is recommended to review the manual that came with it. There are cases where the CR2032 and CR2025 batteries may be installed interchangeability, but many experts prefer the CR2032 because it tends to last longer thanks to its greater capacity (mAh).
How can I reprogram my key fob?
To reprogram your key fob, get inside the vehicle, place your key into its ignition then turn it on the position which says “RUN.” Next, click and hold the button which says “UNLOCK” on the remote for approximately 4 seconds while clicking the button which says “PANIC.” Finally, press then release the “UNLOCK” and “LOCK” buttons.